Choosing An Air Management System For Your Air Suspension Kit?
Air Ride Suspension can be a very diverse and expandable system to add to your vehicle, whether you are looking to customize your car, truck or SUV for show or simply need a more accessible way of accessing your vehicle an Air Ride System may be the answer for you. When deciding your air ride kit one of the most important aspects of this unique combination of components is the “Air Management” hardware. X2 Industries provides just about any piece of hardware you will need when assembling your Air Supply piece by piece, or if you want something ready to go, we have that too!
Depending on what your goals are with your newly installed air ride system in your vehicle, there may be some factors to consider in regards to the Air Ride Management hardware you go with. If the past many customer would simply go with the lowest cost option to get up and running which in some cases can work out great for the customer on a budget or simply only needs less air to lift and lower the vehicle a minimal amount of times during a trip, and that is where our “Standard Air Ride Suspension Kits” come in. These systems include all the necessary equipment at the wheels with a smaller air supply to accommodate cost and in many cases will be perfect for that customer that wants to get up and running on air. If you are just using this system for accessibility then upgrading at a later time will not be required as the combination of a 3 gallon tank and a 1/3 hp – 12 volt – 100% duty cycle compressor should be more then enough power and a great match for your needs. Although if it is a budget concern at the moment and you are leaning toward a custom application then going with this system for the time being will definitely do the trick. We also offer upgrades for the standard systems “Air Management Hardware” to include a larger 3/4 hp compressor, or even larger 5 / 9 gallon tanks to add even more air and further the pay time of your custom car, truck or SUV. The bottom line is that a higher output compressor and a larger tank will give you additional play time with your suspension and are the ultimate factors which will accommodate your specific needs when it comes to the hardware you are looking for. X2 also offers a complete line of “Plug and Play Air Ride Systems” which are basically the same kit as our “Standard Air Ride” but in a pre-built state when shipped to allow a quicker installation time. To make this easier on our customer we assemble these systems inside of a 12 x 12 x 7 steel enclosure to allow a simple two wire connection and 6 air connections (2 tank and 4 to the bags). They also automatically include a larger 3/4 hp compressor for those of our customers looking for higher air output in there Air Management.
Be sure to know all of your options when your ready to buy!
Click the link below to get familiar with our Standard Air Ride Systems and the included Air Management hardware:
https://www.x2industries.com/aftermarket-air-suspension-standard-air-suspension-kits-c-76_716.html
Click the link below to get familiar with our Standard Air Ride Systems and the included Air Management hardware:
https://www.x2industries.com/aftermarket-air-suspension-plug-play-air-suspension-kits-c-76_71.html
Or check out our upgrade options for both of the kits to ensure you get exactly what you are looking for:
https://www.x2industries.com/aftermarket-air-suspension-upgrades-c-76_473.html
