BLOG

Categories: Vehicle

Chevy Trucks air bag suspension parts. Complete Air ride bags, Custom air management systems, and load leveling kits.

Chevrolet air ride suspension, tow kits, load leveling kits, complete air suspension kits for your Chevy Silverado, Chevy Colorado, Chevrolet Pickup, Chevy Car, Classic Chevrolet and Chevy C10, C20, C30 Trucks. X2 Industries has all your Chevy trucks air suspension kits.

1948-1954 Chevrolet Impala, Bel Air, Biscayne Plug and Play Air Suspension Kit
Kit Includes: 
9 Rocker Switch Controller (for independent corner control, all up/down, right, left, front and back)
4 zone gauge display 
Large 4CFM DC7500 3/4 hp compressor 
Pressure Switch 
5 gal stainless steel tank 
3/8 inch – 300PSI air valve engine 
Air Line 
Fittings 
2 front bags and coil spring brackets (for specific application) 
2 rear bags and coil spring brackets (for specific application)
Parts are configured to get your install up and running flawlessly! 
Kit is equip with Plug & Play air engine valves for quick installation time, and an all around clean look!
Note: Depending on application welding could be required. Item picture may not show everything included in kit.

CUSTOM AIR RIDE UPGRADES AVAILABLE!

 1955-1957 Chevrolet Impala, Bel Air, Biscayne Plug and Play Air Suspension Kit
1955-1962 Chevrolet Pickup Plug and Play Air Suspension Kit
Kit Includes: 
9 Rocker Switch Controller (for independent corner control, all up/down, right, left, front and back)
4 zone gauge display 
Large 4CFM DC7500 3/4 hp compressor 
Pressure Switch 
5 gal stainless steel tank 
3/8 inch – 300PSI air valve engine 
Air Line 
Fittings 
2 front bags and coil spring brackets (for specific application) 
2 rear bags, coil spring brackets and 4link (for specific application)
Parts are configured to get your install up and running flawlessly! 
Kit is equip with Plug & Play air engine valves for quick installation time, and an all around clean look!
Note: Depending on application welding could be required. Item picture may not show everything included in kit.

AIR BAG SUSPENSION UPGRADES AVAILABLE!

 1958-1964 Chevrolet Impala, Belair, Biscayne Plug and Play Air Suspension Kit
 1962-1965 Chevrolet Nova Plug and Play Air Suspension Kit
 1963-1967 Chevrolet C10 Plug and Play Air Suspension Kit
 1963-1972 Chevrolet Pickup Plug and Play Air Suspension Kit
 1964-1972 Chevrolet Chevelle, Monte Carlo, El Camino Plug and Play Air Suspension Kit
 1964-1972 Chevrolet Malibu Plug and Play Air Suspension Kit
 1965-1970 Chevrolet Impala, Caprice, Belair, Biscayne Plug and Play Air Suspension Kit
 1965-1972 Chevrolet Corvair Plug and Play Air Suspension Kit
 1967-1969 Chevrolet Camaro, Special 4-Link Plug and Play Air Ride Kit
 1967-1972 Chevrolet C10 Plug and Play Air Suspension Kit – Street Scraper
 1968-1982 Chevrolet Corvette C3 Plug and Play Air Suspension Kit
 1969-1972 Chevrolet Nova, Special 4-Link Plug and Play Air Suspension Kit
 1970-1981 Chevrolet Camaro Plug and Play Air Suspension Kit
 1971-1996 Chevrolet Caprice, Chevelle, El Camino, Holden Plug and Play Air Suspension Kit
 1973-1987 Chevrolet C10 Plug and Play Air Suspension Kit – Street Scraper
 1973-1987 Chevrolet C10, K10 Plug and Play Air Suspension Kit
 1973-1991 Chevrolet C20, C30, C35 Plug and Play Air Suspension Kit
 1976-1976 Chevrolet Luv Mini Truck 2wd Only Plug and Play Air Suspension Kit
 1978-2002 Chevrolet Van, G1500, G10 Express, Savana Plug and Play Air Suspension Kit
 1982-1992 Chevrolet Camaro Plug and Play Air Suspension Kit
 1982-2004 Chevrolet 2WD S10, S15, Blazer, Sonoma, Hombre Plug and Play Air Suspension Kit
1985-2004 Chevrolet Astro, Safari Plug and Play Air Suspension Kit
Kit Includes: 
9 Rocker Switch Controller (for independent corner control, all up/down, right, left, front and back)
4 zone gauge display 
Large 4CFM DC7500 3/4 hp compressor 
Pressure Switch 
5 gal stainless steel tank 
3/8 inch – 300PSI air valve engine 
Air Line 
Fittings 
2 front bags (for specific application) 
2 rear bags, brackets and 4link (for specific application)
Parts are configured to get your install up and running flawlessly! 
Kit is equip with Plug & Play air engine valves for quick installation time, and an all around clean look!
Note: Bolt on rear link kit available for this vehicle…. Please give us a call for a price! 1-800-823-0320 or email: [email protected]

AIR BAG SUSPENSION KIT UPGRADES AVAILABLE!
Chevrolet Truck Air Bag Suspension | Custom Chevy Low Rider Kits | Air Lift Kits
107

Categories: Suspension

On numerous occasions our sales team have been asked about our systems being compatible with fast bagging there vehicle. To answer this question first we need to understand what fast bagging a car or truck really is. The concept of fast bagging simply refers to an air ride kit that will allow the passenger/operator to move the suspension in a very fast way. To do this, a taxing demand of air and increased pressure is required. This additional pressure and large amount of volume can be quite tedious for a small single compressor to keep up with. Even two large compressors can have a hard time keeping up with the air demands required to move any vehicle fast enough to consider it to be fast bagged.

This process now leads us into a diffrent air supply territory, which is regulated down to suitable pressure not to overwhelm the systems maximum pressure specifications. It uses a 80cu ft nitrogen tank that can be purchased or leased from an air gas supplier like Praxair or AirGas. Nitrogen has become the gas standard when it comes to fast bagging anything, and a regulator set between 200 and 300 psi will not exceed any of our parts maximum specs. Keep in mind, when increasing the pressure in your system to speed up the bag movement you may inadvertently cause leaks to occur at your once leak free fitting connections. Using a 50/50 mix of soap and water in a spray bottle and some liquid thread sealer/compound will be your greatest asset in wrapping up any stubborn air leaks. Thought using 3/8 inch air lines are an ok way to go, many prefer to also increase to diameter of the airline to 1/2 or more for an even quicker response.

A Nitrogen Tank Plumbed Air Ride Suspension System – Viewed Above

We hope this helps elaborate on what it takes to fast bag your new or current air ride system. Keeping your compressor or compressors connected while the regulated nitrogen speeds things up is also certainly ok to do and when your out of nitrogen your system will simply revert back to the compressors to maintain your standard operating psi.

Looking to get started with your fast bag kit? Need help finding what your looking for? Give us a call 1-800-823-0320

aftermarket customized air suspension, many applications available

214

Categories: Suspension

Universal air ride suspension is more than just an air ride suspension kit that can be installed on just about any application. It can be used in conjunction with other parts, to build many different things . In our years in business we have seen customers utilize these suspension systems for projects like trailer suspension lift and lowering for Vehicle hauling excess ability. They have also been used for custom fabricated chassis’s, to assist in load support and even mechanical vehicle lift equipment (as apposed to using floor jacks). Our customers have used our universal air bag suspension for just about anything you can imagine. When looking for a system to accommodate your project, be sure to purchase an air bag kit with the appropriate “u-build it” bag brackets. If you need something very specific, I am sure we can help. X2 Industries builds brackets for hundreds of different vehicles. If you are looking for a bracket that will saddle the axle, or is mounted rear of the axle as seen in the pictures below simply let us know.

Axle Air Bag Brackets, Rear Of Axle Air Suspension Brackets

All the necessary components to have a fully functioning pneumatic air system is included in all of our kits. Below you will find a parts list to our “Extreme” air suspension system. This will give you an idea as to what you may need.

Kit includes:

1 x SWITCH PANEL WITH GAUGES AND SWITCHES (digital, wireless, or computer controllers available)
1 x 380C 1/3 HP COMPRESSOR (STANDARD KIT) OR DC7500 ¾ HP COMPRESSOR (PLUG & PLAY KIT)
1 x COMPRESSOR CIRCUIT BREAKER & RELAY
1 x 80 ON 120 OFF PRESSURE SWITCH
1 x 3 GALLON TANK (Upgrade to 5 Gal!) +45.00
1 x LEADER HOSE & CHECK VALVE ASSEMBLY
4 x BAGS (FOR FRONT AND REAR)
4 x UPPER AND LOWER BAG BRACKETS / STRUTS (FRONT AND REAR) (VEHICLE SPECIFIC)
8 x 3/8 INCH VALVES
1 x COMPLETE AIR FITTINGS KIT
1 x AIR LINE FOR MAIN (3/8 inch) AND GAUGES (1/4 inch)(60+ FEET)
1 x TRIANGULATED OR PARRALLEL 4 LINK KIT (DEPENDING ON THE KIT ORDERED) (VEHICLE SPECIFIC)

ALL AIR RIDE SUSPENSION KITS INCLUDE EVERY PIECE OF HARDWARE NEEDED TO HAVE A FULLY FUNCTIONAL AIR RIDE SYSTEM IN YOUR VEHICLE.

FOR ADDITIONAL UPGRADE OPTIONS CHECK OUT OUR UPGRADE PAGE BELOW: Air Suspension Upgrades, Compressors, Tanks, Valves, Air Line, Switch Controllers and More

142

Categories: News

X2 would like to wish everyone a wonderful holiday season!

We will be closed Monday, Dec 24th and Tuesday, Dec 25th for Christmas. Our office will also be closed Monday, Dec 31st and Tuesday, Jan 1st for New Years.

If you have any questions during this time please don’t hesitate to shoot us an email at [email protected] and we will get back with you asap.

Merry Christmas & Happy New Year!
From our family to yours.

116